Home > Products > Lag Shield Anchor

Concrete Lag Shield Anchors 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"

The lag shield anchor also called concrete lag screw shields, lag screw anchor, is designed for use in conjunction with a lag screw, it can be used in many materials such as concrete, brick, block or mortar joints. The anchor is made from Zamac, as a result, it's highly corrosive resistant. There are six diameters: 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4". For each diameter, there are both short and long shields. The short lag shield anchor is used in harder base materials and the long concrete lag shield anchor is used in softer base materials. As the screw is inserted into the anchor, the anchor splits apart and expands against the base material. This expansion creates friction.

A lag shield anchor made of zamac is a little cyan-blue

The lag shield anchor is used in conjunction with a lag screw and can be used in concrete, brick, block or mortar joints.

On the top a long lag shield anchor and a short lag shield anchor under it

For each diameter of lag shield anchor, there are both short and long shields.The short one is used in harder base materials and the long one is used in softer base materials.

A white zinc plated lag shield anchor

Lag shield anchor has different kinds of colors, this is a white zinc plated anchor.

 A blue zinc plated lag shield anchor

Lag shield anchor has different kinds of colors, this is a blue zinc plated anchor.

A zinc plated lag shield anchor a matched screw and a plastic washer

Lag shield anchor should be used together with the matched lag screw and the washer

Lag shield anchor splits apart after the screw has inserted into it

As the screw is inserted into the anchor, the anchor splits apart and expands against the base material.

Sizes:
The diameter refers to the inside diameter, there are six diameters:1/4", 5/16", 3/8", 1/2", 5/8", for each diameter, there are both short and long shields.

Specification of the short lag shield anchor
Items Bolt size (inches) Anchor length (inches) Hole size (inches) Quantity/box
LSAS141 1/4 1 1/2 100
LSAS5161 5/16 1-1/4 1/2 100
LSAS381 3/8 1-3/4 5/8 50
LSAS122 1/2 2 3/4 25
LSAS582 5/8 2 7/8 25
LSAS342 3/4 2 1 25
Specification of the long lag shield anchor
Items Bolt size (inches) Anchor length (inches) Hole size (inches) Quantity/box
LSAL141 1/4 1-1/2 1/2 100
LSAL5161 5/16 1-3/4 1/2 100
LSAL382 3/8 2-1/2 5/8 50
LSAL123 1/2 3 3/4 25
LSAL583 5/8 3 7/8 25
LSAL343 3/4 3 1 25
A new stainless steel grill installed in a part of block wall

Lag Shield Anchors can be used to fasten the grill onto a block wall, the anchor is used in many materials such as concrete, block, brick or mortar.

Features:

  • Lag shield anchor is made from Zamac, so it's highly corrosive resistant.
  • Lag shield anchor can be used in many base materials.
  • There is no need to use a setting tool.
  • The size of the hole should be equal to the outside diameter of the anchor.
  • After installation, the fixture is removable.
  • The minimum distance between two anchors is 10 anchor diameters, and 5 anchor diameters from an unsupported edge
  • When the base material is hard, use the short shield, when the base material is soft, use the long shield.

Installation:

  1. Use a hammer drill and a correctly sized carbide drill bit to drill a hole in the base material.
  2. Clean out all the debris
  3. Insert the anchor into the hole with a hammer and it should be flush with the base material
  4. Put the fixture on the anchor and insert the properly sized lag screw through the fixture and into the anchor.

Application:
The anchor can be used in many applications: hard and soft base material, mortar joints, shallow attachments, masonry anchorage.

Inquiry for Our Product

Betonanker fastener Industrial Limited
E-mail: sales@concrete-anchors.com

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

To Top