Home > Products > Sleeve Anchor

Sleeve Anchor for Light to Heavy Duty Fastening

Sleeve anchor has other names, it's also called block sleeve anchor, concrete sleeve anchor. The anchors are versatile masonry expansion anchors. Sleeve anchors are available in zinc plated carbon steel and stainless steel. The anchor is made up of four parts: nut, washer, threaded stud and sleeve. At one end of the thread stud is cone-shape and rest is threaded. The sleeve is a tubular piece of steel and the bottom end of the sleeve is split. When the thread stud is pulled up through it, the bottom of sleeve expanded. Concrete sleeve anchor is can be used in the following base materials: concrete, brick, block, mortar. The applications are from light to heavy-duty fastening. The anchor has five head styles: hex, flat, acorn, rod, round.

A yellow concrete sleeve anchor and its four parts: nut, washer, threaded stud and sleeve.

Sleeve anchor is made up of four parts: nut, washer, threaded stud and sleeve. At one end of the thread stud is cone-shape and the other end is threaded.

Five kinds of sleeve anchor, the head style from left to right are hex, acorn, rod, flat, round.

Sleeve anchor has five head styles: hex, acorn, rod, flat, round. We choose sleeve anchor based on the specific situation.

Specification:

Feature:

  • The anchor is available for five head styles: hex, round, flat, acorn, rod.
  • The installation is easier and faster
  • The anchor and the hole are of the same size.
  • The sleeve anchor can be installed in solid concrete, brick or block base material.
  • The anchor is good for light to heavy duties.
  • Concrete sleeve anchor comes fully assembled and ready to use
  • The minimum distance between the two anchors is ten anchor diameters and the minimum distance between the anchor and the edge is five anchor diameters.

Installation:

  1. Drill a hole with a hammer and carbide tipped drill bit. The diameter of the hole should be equal to the diameter of the concrete sleeve anchor.
  2. Clean out all the debris.
  3. Set the nut until it's flush with the top of the sleeve anchor.
  4. Insert the sleeve anchor through the fixture into the hole, the washer and nut should be tight against the fixture.
  5. Turn the nut until it's firm enough.
  6. Set the anchor by turning the nut three to four full turns
  7. We tighten the acorn and hex nut sleeve with a standard wrench, and we tighten the flat and round headed sleeves with either a Phillips or flat screw driver.

Application:
Sleeve anchor can be used in many materials for light to heavy fastening duty. Usually this type concrete anchor is used in concrete, brick, and block.

A corner of wooden thing with a sleeve anchor

Sleeve anchor has many applications, it can be used in wood.

A man use a set tool to insert a sleeve anchor into a brick.

Sleeve anchor has many applications, it can be used in brick.

Specification of the zinc plated sleeve anchor
Items Size (diameter × length) Head Style Bolt diameter Quantity /box
SAZA1458 1/4" × 5/8" Acorn 3/16" 100 per box
SAZA14138 1/4" × 1-3/8" Acorn 3/16" 100 per box
SAZA14214 1/4" × 2-1/4" Acorn 3/16" 100 per box
SAZH516112 5/16" × 1-1/2" Hex 1/4" 100 per box
SAZH516212 5/16" × 2-1/2" Hex 1/4" 100 per box
SAZH38178 3/8" × 1-7/8" Hex 5/16" 50 per box
SAZH383 3/8" × 3" Hex 5/16" 50 per box
SAZH384 3/8" × 4" Hex 5/16" 50 per box
SAZH12214 1/2" × 2-1/4" Hex 3/8" 25 per box
SAZH123 1/2" × 3" Hex 3/8" 25 per box
SAZH124 1/2" × 4" Hex 3/8" 25 per box
SAZH126 1/2" × 6" Hex 3/8" 25 per box
SAZH58214 5/8" × 2-1/4" Hex 1/2" 10 per box
SAZH583 5/8" × 3" Hex 1/2" 10 per box
SAZH58414 5/8" × 4-1/4" Hex 1/2" 10 per box
SAZH586 5/8" × 6" Hex 1/2" 10 per box
SAZH34212 3/4" × 2-1/2" Hex 5/8" 10 per box
SAZH34414 3/4" × 4-1/4" Hex 5/8" 10 per box
SAZH34512 3/4" × 5-1/2" Hex 5/8" 10 per box
SAZH34614 3/4" × 6-1/4" Hex 5/8" 10 per box
SAZF14138 1/4" × 1-3/8" Flat 3/16" 100 per box
SAZF142 1/4" × 2" Flat 3/16" 100 per box
SAZF143 1/4" × 3" Flat 3/16" 100 per box
SAZF144 1/4" × 4" Flat 3/16" 100 per box
SAZF516212 5/16" × 2-1/2" Flat 1/4" 100 per box
SAZF516312 5/16" × 3-1/2" Flat 1/4" 50 per box
SAZF38234 3/8" × 2-3/4" Flat 5/16" 50 per box
SAZFP384 3/8" × 4" Flat 5/16" 50 per box
SAZFP385 3/8" × 5" Flat 5/16" 50 per box
SAZFP386 3/8" × 6" Flat 5/16" 50 per box
SAZR14114 1/4" × 1-1/4" Round 3/16" 100 per box
SAZR142 1/4" × 2" Round 3/16" 100 per box
Specification of the stainless steel sleeve anchor
Items Size Head Style Bolt diameter Quantity /box
SASA14138 1/4" × 1-3/8" Acorn 3/16" 100 per box
SASA14214 1/4" × 2-1/4" Acorn 3/16" 100 per box
SASH516112 5/16" × 1-1/2" Hex 3/16" 100 per box
SASH516212 5/16" × 2-1/2" Hex 1/4" 100 per box
SASH38178 3/8" × 1-7/8" Hex 1/4" 50 per box
SASH383 3/8" × 3" Hex 5/16" 50 per box
SASH384 3/8" × 4" Hex 5/16" 50 per box
SASH12214 1/2" × 2-1/4" Hex 5/16" 25 per box
SASH123 1/2" × 3" Hex 3/8" 25 per box
SASH124 1/2" × 4" Hex 3/8" 25 per box
SASH126 1/2" × 6" Hex 3/8" 25 per box
SASH58214 5/8" × 2-1/4" Hex 1/2" 10 per box
SASH583 5/8" × 3" Hex 1/2" 10 per box
SASH58414 5/8" × 4-1/4" Hex 1/2" 10 per box
SASH586 5/8" × 6" Hex 1/2" 10 per box
SASH34212 3/4" × 2-1/2" Hex 5/8" 10 per box
SASH34414 3/4" × 4-1/4" Hex 5/8" 10 per box
SASH34512 3/4" × 5-1/2" Hex 5/8" 10 per box
SASH34614 3/4" × 6-1/4" Hex 5/8" 10 per box

Inquiry for Our Product

Betonanker fastener Industrial Limited
E-mail: sales@concrete-anchors.com

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

To Top